RBTIC sprue picker robots automate sprue and runner removal for 30T–250T injection molding machines – delivering consistent waste extraction, reduced manual handling, and streamlined production for small- to medium-tonnage operations.
Parameters
|
Model |
BRTP06ISS0PC |
BRTP08WSS0PC |
|
Power Source(kVA) |
0.05 |
1.27 |
|
Recommended I.M.M(ton) |
30T-150T |
150-250T |
|
Drive Method |
Driven by cylinder |
Driven by cylinder |
|
Model of EOAT |
Zero suctions Zero fixtures |
Zero suctions Zero fixtures |
|
Traverse Stroke(mm) |
/ |
/ |
|
Crosswise Stroke(mm) |
120 |
300 |
|
Vertical Stroke(mm) |
650 |
850 |
|
Max.Payload(kg) |
2 |
2 |
|
Dry Take Out Time(sec) |
1.6 |
2 |
|
Dry Cycle Time(sec) |
5.5 |
6 |
|
Swing Angle(degree) |
30°- 90° |
30°- 90° |
|
Air Consumption(NI/cycle) |
3 |
3 |
|
Repeatability(mm) |
±0.05 |
±0.05 |
|
Weight(kg) |
36 |
60 |
Key Advantages of the Sprue Picker Series
Ultra-Lightweight Design & Rapid Take-Out: Optimized for quick-stroke runner extraction – using high-strength aluminum extrusion and high-speed pneumatic cylinders (or DC stepping/servo drives) to achieve dry cycle entry/exit times under 0.4 seconds.
Compact Footprint & Direct Platen Mounting: Direct-mount architecture requires zero additional floor space – ideal for tight factory layouts and small-tonnage IMMs (30T–250T).
Integrated Nipper & Runner Separation: Built-in pneumatic nippers cleanly shear the runner from the gate at the point of extraction – enabling sorted drops (sprues to regrind, parts to conveyor).
Advanced Fall Protection & Safety Interlocks: Mechanical drop-prevention brakes, magnetic reed sensors for precise stroke feedback, and full interlock integration with EUROMAP safety circuits – engineered for high-frequency vertical drop zones.
Sprue Picker or Full Injection Molding Robot?
Not every molding application requires a full-size take-out robot. The right solution depends on what needs to be removed and what happens next.
Choose a Sprue Picker Robot when
- The main task is removing sprues or runners after molding.
- The application involves light handling loads within the rated payload.
- A compact, dedicated removal mechanism is preferred.
- The production process does not require complex part stacking or multi-stage transfer.
Consider a Full Injection Molding Robot when
- Both the finished part and runner need to be extracted and handled.
- Parts must be placed in a specific orientation or position.
- The process requires stacking, sorting, or transfer to downstream equipment.
- More complex motion paths or additional handling axes are required.
Why Choose Our Sprue Pickers
Plug-and-Play Simplicity: Simple teach box interface or thumbwheel parameter adjustment allows operators to set up a new drop cycle in less than 5 minutes.
Low Maintenance, High Durability: Hard-anodized pneumatic components and self-lubricating linear bearings designed for millions of maintenance-free cycles.
Global Compliance: CE-certified electrical and pneumatic layouts meeting rigorous European and North American industrial safety directives.
Cost-Effective Automation Entry: An immediate ROI by eliminating manual de-gating labor and preventing mold damage caused by retained sprues.
What Information Do We Need for Model Selection?
To evaluate a suitable sprue picker, please provide:
Injection Molding Machine: Brand, model, and clamping force in tons.
Mold Details: Mold dimensions, opening distance, and available installation clearance.
Sprue or Runner: Shape, dimensions, weight, and removal position.
Production Requirements: Target cycle time and number of molding cycles per hour.
Installation Conditions: Available compressed air, mounting arrangement, and preferred scrap collection point.
FAQ
Q: What is the typical lead time and installation process?
A: Standard models ship within 10–15 business days. Customized End-of-Arm Tooling (EOAT) or special stroke models take 20–25 days. Installation is plug-and-play with pre-configured wiring, remote video guidance, and intuitive touch-pendant software.
Q: What voltage and pneumatic pressure requirements do you support for overseas factories?
A: We customize electrical configurations to match your local grid (110V/220V/380V/440V, 50Hz/60Hz). Pneumatic models operate on standard industrial air supply at 0.4 – 0.6 MPa (4–6 bar).
Q: What warranty and after-sales technical support do you provide?
A: Each robot is provided with a comprehensive 12-month warranty service. We offer 24/7 online technical support, regular software updates, and can arrange global fast delivery for replacement parts within 48 hours.
Q: What payment terms are available?
A: Standard terms: 30% T/T deposit to start production, 70% balance before shipment.
Hot Tags: sprue picker robot, China sprue picker robot manufacturers, suppliers, factory
